Commercial Floor Stripping, Waxing and Floor Care in the Seattle Area

Worn, dull or yellowed floors make a whole building look tired. EcoVerde restores and maintains commercial hard floors for schools, offices, clinics, churches and retail spaces, using our own professional scrubbers and floor machines.

Floors we care for

  • Vinyl composition tile (VCT)
  • Ceramic and porcelain tile, including grout
  • Rolled linoleum and sheet vinyl
  • Sealed and polished concrete

Strip and wax: how we restore a floor

  1. We clear and protect the area, then dust mop to remove loose debris.
  2. We apply stripper and work it in with a commercial floor machine to remove old, dirty finish down to the tile.
  3. We scrub, rinse and neutralize so the new finish bonds properly.
  4. We apply several thin, even coats of commercial floor finish and let each coat dry fully.
  5. We return furniture once the finish has cured, and leave you with care instructions.

The result is a clean, protected floor with a deep, even shine. Most strip-and-wax projects are done after hours or over a weekend, and larger sites over school breaks.

Keeping the shine: scrubbing and burnishing

After a strip and wax, regular maintenance keeps floors looking new for longer and pushes back the next full strip. We offer:

  • Machine scrubbing with walk-behind and compact auto scrubbers to lift ground-in dirt
  • Scrub and recoat to refresh worn traffic lanes without a full strip
  • Burnishing with electric high-speed burnishers, plus spray buffing where needed, as follow-up care about 3 to 6 months after waxing, to bring back high gloss (sooner only for scratches or unusually heavy wear)

Large projects, done on schedule

We regularly handle summer floor projects for school campuses, including nearly 60,000 square feet of VCT, tile, linoleum and carpet across multiple buildings in a single break. Every large job is planned building by building, with the scope locked in writing before work starts.

Frequently asked questions

How often should commercial floors be stripped and waxed?

Most high-traffic VCT needs a full strip and wax every 12 to 18 months, with scrubbing and burnishing in between. We will recommend a schedule at your walkthrough.

How long before we can walk on the floor?

Light foot traffic is usually fine the next morning. We schedule work so your floors are ready when your building opens.

Can you work around school or business hours?

Yes. Nights, weekends and school breaks are our normal schedule for floor projects.

Do you also clean carpets?

Yes. Many floor projects include both; see commercial carpet cleaning.

Book a free walkthrough

Call (206) 945-4186 or request a quote.